Contrex CX-1010 Manuel d'utilisateur télécharger pdf (Page 18)

Page 16

Run

(J6 pins 3, 5)

Digital Input 3

When the RUN input (J6, pin 5) is momentarily shorted

to common, the CX–1010 enters the RUN state. As a

momentary input, RUN is internally latched and does

not need to be maintained closed by an operator

device.

NOTE: Close the R–Stop, H-Stop and F–Stop inputs

prior to entering the Run state. If you are only

using one of the Stop inputs, wire short the

other Stop inputs to the common or the

CX–1010 will not enter run.

Jog Forward

(J6 pins 6, 8)

Digital Input 4

JOG FORWARD is a maintained input. When it is

closed, it sends a forward speed command signal to the

drive at the selected Jog Setpoint . As a maintained

input, JOG FORWARD is only active when the operator

device is closed.

NOTE: Close the R–Stop, H-Stop and F–Stop inputs

prior to entering the Jog state. If you are only

using one of the Stop inputs, wire short the

other Stop inputs to the common or the

CX–1010 will not enter Jog.

Jog Reverse

(J6 pins 7, 8)

Digital Input 5

JOG REVERSE is a maintained input. When it is

closed, it sends a reverse speed command signal to the

drive at the selected Jog Setpoint . As a maintained

input, JOG REVERSE is only active when the operator

device is closed.

NOTE: Close the R–Stop, H-Stop and F–Stop inputs

prior to entering the Jog state. If you are only

using one of the Stop inputs, wire short the

other Stop inputs to the common or the

CX–1010 will not enter Jog.

Figure 16 Run

RUN

COM

DI_3

Figure 17 Jog Forward

JOG FORWARD

DI_4

COM

Figure 18 Jog Reverse

JOG REVERSE

DI_5

COM

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 53 54

Commentaires sur ces manuels

Pas de commentaire

Contrex CX-1010 Manuel d'utilisateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Contrex CX-1010