Contrex CX-1010 Manuel d'utilisateur télécharger pdf (Page 12)

Page 10

INPUTS

NOTE: The installation of this motor control must conform to area and local electrical codes. Refer to page

9 before you begin wiring.

AC Power Input

(J4 pins 1, 2,3)

The CX–1010 operates on either a 115 VAC - 10% +

15%, 0.250 Amp., 50/60 Hz or a 230 VAC -10% +15%,

0.125 Amp, 50/60 Hz. Use the separate 3 pin connector

(J4) for the power connection.

* Fuse L1 for 115 VAC applications. Fuse L1

and L2 for 230 VAC applications. Use 1 Amp

250 normal blow fuses.

Figure 4 AC Power Input

Neutral (115 VAC)

or L2 (230 VAC)

GND/PE

WARNING

You will damage the CX-1010 if you apply

230 VAC to the AC Power input

when the AC Power Input Voltage switch

is in the 115 V position.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 53 54

Pas de commentaire

Contrex CX-1010 Manuel d'utilisateur Page 12